LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2018 >> Passat R-Line >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance System (Tables & General Information) >> Maintenance General Information >> Procedure Descriptions >> Service Interval Display, Resetting And Coding >> SERVICE INTERVAL DISPLAY, RESETTING WITHOUT Vehicle Diagnostic Tester >> Only Applicable Through MY 2013
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Only Applicable Through MY 2013

Using the Rocker Switch on the Windshield Wiper Lever or the Button in the Multifunction Steering Wheel

GWWN01-10635Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Using the rocker switch, select the "settings" menu, or

-- Using the button on the multifunction steering wheel, select the "settings" menu.

GWWN01-10703Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- In the "Service" submenu, select the menu item "Reset" and then reset the service interval display by pressing the OK button -1- on the windshield wiper lever or in the multifunction steering wheel -5-.

-- Press the OK button on the following confirmation prompt.

Using the Buttons in the Instrument Cluster

-- With the ignition switched off, hold the -3- button pressed.

GWWN01-10704Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn on the ignition.

-- Release the button -3- and briefly press the button for setting the clock -1- one time.

The service interval display is now in reset mode.

After a brief period, the display switches back to the normal display.