Battery Transport Mode, Deactivating: Procedure:
NOTE:
If the displays indicated in the procedure are not shown on the display, refer to the Vehicle Diagnostic Tester operating instructions.
| ODIS Service |
|---|
| -- Connect the Vehicle Diagnostic Tester. Refer to VEHICLE DIAGNOSTIC TESTER, CONNECTING . |
| -- Switch on the ignition. |
| -- Perform the vehicle identification. |
| -- Enter the work order data or select "no work order". |
| -- Select "control module". |
| -- Select "Data bus diagnostic interface". |
| -- Select "identify control module". |
| -- Select "Guided Functions". |
| -- Select "switch on/switch off transport mode". |
| -- Follow the "Guided Functions" instructions. |