Left And Right Front Treble Speaker -R20/R22-, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

-- Tighten the screws on the Left Front Treble Speaker -R20- to the tightening specification (2 Nm).

-- Insert the clips on the cover into the mounts on the instrument panel, if necessary.

NOTE:

Position the centering drift -2- in the center.

Insert the pin into the clip.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the cover -1- under the Sunlight Photo Sensor -G107-.

-- Attach the cover -1- from the inside to the outside.