Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment.

-- Remove the instrument cluster trim. Refer to INSTRUMENT PANEL .

-- Remove the bolts -arrows- on the Information Electronics Control Module 1 -J794- -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Information Electronics Control Module 1 -J794- far enough from the installation slot that the connectors on the back of the Information Electronics Control Module 1 - J794- can be reached.

-- Squeeze the safety mechanism on the connector -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Move the locking bracket in direction of the -arrow-. The connector will be pushed out at the same time.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connectors in direction of -arrows- from the antenna connections.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- If equipped, release and disconnect the connector for external multimedia device connector.