Fuel Injector Seals, Replacing: Notes
Special tools and workshop equipment required
- Injector/Combustion Chamber Seal Tool Set :T10133B
- Injector/Combustion Chamber Seal - Assembly Cone 5 :T10133/5
- Injector/Combustion Chamber Seal - Assembly Cone 6 :T10133/6
- Injector/Combustion Chamber Seal - Calibrating Sleeve 7 :T10133/7 .
- Injector/Combustion Chamber Seal - Calibrating Sleeve 8 :T10133/8
- Injector/Combustion Chamber Seal - Expansion Set Spacer Sleeve 11 :T10133/11
- Injector/Combustion Chamber Seal - Expansion Set Locking Plate 12 :T10133/12
- Injector/Combustion Chamber Seal - Expansion Set Assembly Cone :T10133/13
- Injector/Combustion Chamber Seal - Expansion Set Calibrating Sleeve :T10133/14
NOTE:
The >>long<< fuel injectors for cylinders 1, 3 and 5 must not be separated.
Do not oil or grease the combustion chamber sealing ring (Teflon® ) on the fuel injector.