Overview - Shift Unit
Courtesy of AUDI OF AMERICA, LLC
- Gearshift Unit
- Consisting of the gearshift shaft and the gearshift cover
- The components cannot be separated from each other
- Back-Up Lamp Switch -F4-
- 20 Nm
- Coat the tab lightly with MoS 2
grease.
- Locking Elbow
- For adjusting the shift mechanism
- Removing. Refer to Figure.
- Installing. Refer to Figure.
- Relay Lever
- Installation position. Refer to Figure.
- Clip
- Secure the relay lever in the gearshift cover
- Seal
- Nut
- 23 Nm
- Replace after removing
- Self-locking
- Selector Lever
- Cap
- For the transmission ventilation
- Cap
- Spring
- Not installed in all transmissions
- Install if present