Overview - A/C Compressor Power Unit, Golf And Golf Wagon

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. A/C Compressor
   • Removing and installing. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .
   • Removing from and attaching to the bracket. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .
   • There are different versions. Refer to the Parts Information.
2. O-Ring
   • Replace after removing.
   • There are different versions. Refer to the Parts Information.
   • Coat with refrigerant oil before installing.
3. High Pressure Side Refrigerant Line
4. Bolts
   • 22 Nm
   • Quantity: 2
5. Low Pressure Side Refrigerant Line
6. O-Ring
   • Replace after removing.
   • There are different versions. Refer to the Parts Information.
   • Coat with refrigerant oil before installing.
7. Pressure Relief Valve
   • Checking using the Vehicle Diagnostic Tester. Refer to PRESSURE RELIEF VALVE ON A/C COMPRESSOR, CHECKING .
8. A/C Compressor Regulator Valve -N280-
   • To check, use the Vehicle Diagnostic Tester in the "Guided Fault Finding"  function. Refer to the appropriate Wiring Diagram.
9. Bolts
   • 25 Nm
   • Quantity: 3
10. Belt Pulley with Overload Protection
    • There are different versions. Refer to the Parts Information.
    • Overview. Refer to OVERVIEW - BELT PULLEY .
11. Alignment Sleeve
    • Quantity: 2
12. Oil Drain Plug
    • Denso A/C compressor 30 Nm
    • Mahle/Delphi A/C compressor 20 ± 1 Nm
    • Sanden A/C compressor 15 ± 1 Nm
    • Replace the oil drain plug/seal after removal
    • Only remove on an empty refrigerant circuit.
    • There are different versions. Refer to the Parts Information.