Brake Line Tightening Sequence: (GASOLINE ENGINE)

Fig 1: Brake Lines, Attaching To Hydraulic Unit Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the :VAG1869/2  .

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, STANDARD BLEEDING .

-- Code The Radio.

-- Code the ABS Control Module -J104- using the Vehicle Diagnostic Tester in "Guided Fault Finding".

While doing so, a basic setting for the Steering Angle Sensor -G85-, Transverse Acceleration Sensor -G200-, Longitudinal Acceleration Sensor -G251- and Brake Pressure Sensor 1 -G201- must be performed.