Overview - MECHATRONIC

Fig 1: Exploded View Of Mechatronic

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Transmission
Dual-Clutch Transmission Mechatronic -J743-
- Removing and installing. Refer to MECHATRONIC, REMOVING AND INSTALLING .
Bolt
- Tightening sequence. Refer to Fig 2.
- Replace after removing
Seal
- Replace after removing
Bolts
- 8 Nm +60°
- Replace after removing
- Quantity: 4
Clip
- Replace after removing
Transmission Fluid Pan
- Removing and installing. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .

DSG Transmission Mechatronic J743 - Tightening Specification and Sequence

Fig 2: Dual-Clutch Transmission Mechatronic -J743- - Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts in three steps in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 9-	Install all the way by hand
2.	-1 to 9-	8 Nm
3.	-1 to 9-	45° additional turn