Overview - Assembly Mounts
- 1 -
Engine Support
- Refer to OVERVIEW - SUBFRAME MOUNT .
- 2 -
Engine Mount
- Refer to OVERVIEW - SUBFRAME MOUNT .
- 3, 4, 5 -
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- 6 -
Bracket
- Equipped on some models
- 7, 8, 9 -
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- 10 - Pendulum Support
- 11 -
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- For pendulum support to subframe
- 12 -
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- For pendulum support to transmission
- Transmission with threaded insert. Refer to Fig 2.
- 13 -
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- For pendulum support to transmission
- Transmission with threaded insert. Refer to Fig 2.
- 14 -
Bolts
- 60 Nm +90°
- Replace after removing
- For the transmission mount on the transmission
- Quantity: 3
- 15 -
Bolt
- Tightening Specification. Refer to OVERVIEW - SUBFRAME MOUNT .
- Replace after removing
- 16 - Transmission Mount
Transmission with Threaded Insert (for Example Heli Coil) for Attaching the Pendulum Support
NOTE:
There are threaded inserts (for example "Heli Coil") in the pendulum support fastening holes.
Identifying feature: there is a collar on the first thread -arrow-.
Make sure to use the appropriate bolts and observe the tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .