Overview - Windshield Projection (Head-Up Display): Notes

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2020 Audi S4, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi S4, and 2019 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Windshield Projection (Head-Up Display)

Courtesy of AUDI OF AMERICA, LLC

Nut
- 8 Nm
- Quantity: 3
Expanding Rivet
- For air duct
Exterior Bracket
- For windshield projection control module
- Removing and installing. Refer to OUTER BRACKET, REMOVING AND INSTALLING .
Bolt
- Replace after removing.
- Tightening sequence. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE - TIGHTENING SPECIFICATION AND SEQUENCE .
- Quantity: 2
Instrument Panel
Bolt
- 1 Nm
- Quantity: 5
Upper Cover
- Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
Frame
- For upper cover
Air Duct
- For windshield projection control module
Expanding Rivet
- For air duct
Bolt
- Tightening specifications and sequence. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE - TIGHTENING SPECIFICATION AND SEQUENCE .
Windshield Projection Head Up Display Control Module -J898-
- Removing and installing. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, REMOVING AND INSTALLING .
- Calibrating. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING .
Bolt
- Replace after removing.
- Tightening specifications and sequence. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE - TIGHTENING SPECIFICATION AND SEQUENCE .
- Quantity: 2
Interior Bracket
- For windshield projection control module
- Removing and installing. Refer to INNER BRACKET, REMOVING AND INSTALLING .
Central Tube
Nut
- 8 Nm
- Quantity: 3