6.2 Control Module For Adaptive Cruise Control, Removing And Installing
NOTE:
If the Distance Regulation Control Module - J428- is replaced, call up the respective function. Refer to Vehicle Diagnostic Tester.
Removing
- Remove the VW emblem from the radiator grille. Refer to Body Exterior (Name Badges and Emblems; Front Emblems, Removing and Installing).
- Release the tabs -2-.
- At the same time pivot out the Distance Regulation Control Module - J428- -1- in the direction of -arrow- from the radiator grille.
- Release and disconnect the connector -3-.
Installing
Install in reverse order of removal and note the following:
- The Distance Regulation Control Module - J428- must engage audibly and securely in the radiator grille.
- If necessary, calibrate the adaptive cruise control (ACC). Refer to