Adaptive Cruise Control, Calibrating
Conditions
-- The Distance Regulation Control Module -J428- must be calibrated during the following conditions:
- Distance Regulation Control Module -J428- was removed and installed or replaced.
- Bumping into the Distance Regulation Control Module - J428- when carelessly assembling the front bumper cover.
- Damage to the front bumper cover through an accident or similar.
- The front bumper carrier was remove and installed or replaced.
- Rear Axle Toe will be adjusted.
To great of a horizontal adjustment of the Distance Regulation Control Module -J428- causes the function of the ACC/Front Assist to stay switched off. This adjustment be shown through the following message in the Instrument Cluster -KX2- : ACC/Front Assist not available .
Restricted sensor view from a dirty sensor or inclement weather conditions for example, heavy rain, snowfall, iced over sensor etc. creates a temporary unavailability of the ACC/Front Assist functions. This can show through the following message in the Instrument Cluster -KX2- : ACC/Front Assist no sensor view .
-- Adaptive cruise control calibrating. Refer to Adaptive Cruise Control (ACC) .