Toe Adjustment - Front
WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- 1.
Using alignment equipment and the manufacturer's instructions, measure the front toe.- Refer to Alignment Specifications in the Specifications for optimal alignment settings.
- If the front toe values are not within specification, go to the next step.
- 3.
Turn the engine off and, using a suitable steering wheel holding device, lock the steering wheel in the straight-ahead position.
- 6.NOTE: Do not allow the steering gear bellows to twist while rotating the tie rod.
Rotate the tie rod(s) to achieve the desired toe setting.
- 7.NOTE: Make sure to hold the tie-rod end stationary while tightening the jam nut or damage to the boot may occur.NOTE: Make sure that the toe settings are not disturbed while tightening the jam nuts.
Tighten the tie-rod end jam nut(s) to 103 Nm (76 lb-ft).