April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Backrest - Third Row, 40 Percent: Disassembly

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For parts identification and locations, refer to Seat - Exploded View, Third Row .

1.

Remove the seat backrest cover. For additional information, refer to Seat Backrest Cover - Third Row .

2.

Remove the bolt and the safety belt buckle.
- For installation, align the anti-rotation tab.
- To install, tighten to 40 Nm (30 lb-ft).

3.

Remove the nut, screw and support bracket.

4.

Remove the 2 inboard latch-to-backrest frame bolts and the inboard latch.
- To install, tighten to 40 Nm (30 lb-ft).

5.

Remove the outboard latch-to-cushion frame bolt and the outboard latch.
- To install, tighten to 30 Nm (22 lb-ft).

6.

Remove the 6 screws and the backrest support panel.

7.

To assemble, reverse the disassembly procedure.