Battery Without Visual Indicator

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

If the acid level is below the MIN mark, replace the battery. Refer to BATTERY, REMOVING AND INSTALLING .

-- Check that the battery and terminal clamp are tightly in position and tighten if necessary. Refer to BATTERY: SECURE SEATING OF BATTERY AND BATTERY TERMINALS, CHECKING .

-- Perform a visual inspection of the battery housing and check for the following:

Corrosion on or damage to the battery pole
Damage to the housing

-- Perform a visual inspection of the battery cells to determine the electrolyte level. The acid level must be above the MIN mark.

NOTE:

Using a flashlight during the visual inspection makes it easier to see the MIN and MAX marks.

If the marks are difficult to see: Hold a small mirror at a right angle to the battery cells and use a flashlight to check the electrolyte level.