Left Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Audi Q5, 2011 Audi Q5, 2010 Audi Q5, and 2009 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to OVERVIEW - SUBFRAME MOUNT (See Figure).

Install in reverse order of removal. Note the following:

NOTE:

Replace the bolts which are being tightened with an additional turn.

-- Tighten the subframe, refer to INSTALLING .

-- Install the engine oil cooler, refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Install the A/C compressor, refer to A/C COMPRESSOR - INSTALLING .

-- Install the After-Run Coolant Pump -V51-, refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .