Cap And Guide Pin, Replacing: Installing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Carefully press the guide pin into the protective cap as far as the first groove.
-- Insert the protective cap in the brake caliper.
The protective cap must be seated in the center of the brake caliper.
-- Press the guide pin through the protective cap.
The protective cap must not be seated in both grooves on the guide pin.
Check the movement of the guide pin. Both guide pins must slide.
-- Install the brake caliper.