Speech Input Control Module -J507-, REMOVING AND INSTALLING, THROUGH 10/27/2008: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal.

-- Make sure that harness connector between Speech Input Control Module -J507- and Radio -R- engages correctly in Radio -R-.

Perform the following function test:

-- Switch on the Radio -R-.

-- Briefly depress PTT button on multi-function steering wheel.

A "Ping" tone sounds, the speech input system is active.

-- Say "Help".

Since the Radio -R- is active, the speech dialog system responds with "Commands for the radio are...".

Depending on the equipment, other functions can be selected:

-- If a telephone is installed, say "telephone".

The speech dialog system switches to the telephone mode.

-- Press and hold the PPT button for approximately one second.

The speech dialog system responds with "Cancel" and is deactivated.