Front Information Display Control Head Control Module -J523-, REMOVING AND INSTALLING, MMI BASIC: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the glove compartment.
-- Insert two hooks from the Radio Removal Tool T10057 into the release slits on the Front Information Display Control Head Control Module -J523- until they engage. Points on the grip eyelets of tool face outward.
Fig 1: Insert Two Clips Of T10057 Into Release Slots Of Navigation System With Cd Drive Control Module Until They Engage
-- Remove the Front Information Display Control Head Control Module -J523- from the mounting frame.
-- Pull Radio Removal Tool T10057 out by pressing on locking tabs on the Front Information Display Control Head Control Module -J523-.
-- Release and disconnect the connectors from the Front Information Display Control Head Control Module -J523-.
-- Insert the Fiber-Optic Repair Set - Connector Protective Caps VAS6223/9 -1- onto the MOST bus connector -2-.