Ignition System Overview
WARNING: This page is about a different car, the 2014 Audi A8 Quattro and 2013 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 9 Nm
- Camshaft Position Sensor -G40-
- Removing and installing, refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
- O-Ring
- Replace
- Knock Sensor
- Cylinder bank 1 (right) Knock Sensor 1 -G61-
- Cylinder bank 2 (left) Knock Sensor 2 -G66-
- Removing and installing, refer to KNOCK SENSOR, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Spark Plug
- Replacement interval, refer to => 410Spark Plugs, Replacing.
- Tightening specification, refer to => 410Spark Plugs, Replacing.
- Ignition Coil
- Removing and installing, refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING
- Bolt
- 5 Nm
- Wiring Harness
- Bolt
- 9 Nm
- Engine Speed Sensor -G28-
- Removing and installing, refer to ENGINE SPEED SENSOR -G28-, REMOVING AND INSTALLING
- O-Ring
- Replace
- Camshaft Position Sensor 2 -G163-
- Removing and installing, refer to CAMSHAFT POSITION SENSOR, REMOVING AND INSTALLING .
- Bolt
- 9 Nm