Ignition System Overview
WARNING: This page is about a different car, the 2014 Audi A8 Quattro and 2013 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 9 Nm
- Camshaft Position (CMP) Sensor -G40-
- Removing and installing, refer to CAMSHAFT POSITION SENSOR -G40- / CAMSHAFT POSITION SENSOR 2 -G163-
- O-ring
- Replace
- Knock Sensor (KS)
- Cylinder bank 1 (right) KS 1 -G61-
- Cylinder bank 2 (left) KS 2 -G66-
- Removing and installing, refer to KNOCK SENSORS -G61- / KNOCK SENSORS -G66-
- Bolt
- 25 Nm
- Spark Plug
- Change interval, refer to MAINTENANCE INTERVALS .
- Tightening specification, refer to SPARK PLUGS, REPLACING .
- Ignition Coil
- Removing and installing, refer to IGNITION COILS
- Bolt
- 5 Nm
- Wiring Harness
- Bolt
- 9 Nm
- Engine Speed (RPM) Sensor -G28-
- Removing and installing, refer to ENGINE SPEED SENSOR -G28-
- O-ring
- Replace
- Camshaft Position (CMP) Sensor 2 -G163-
- Removing and installing, refer to CAMSHAFT POSITION SENSOR -G40- / CAMSHAFT POSITION SENSOR 2 -G163-
- Bolt
- 9 Nm