Transmission Mount

WARNING: This page is about a different car, the 2014 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Automatic Transmission Mount 0BK Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- For the tightening specification, refer to ASSEMBLY MOUNTS OVERVIEW .
Tunnel Crossmember
- For removing and installing, refer to ASSEMBLY MOUNTS OVERVIEW .
Stop
- for the transmission mount
Transmission Mount
- Removing and installing, refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- For the tightening specification, refer to ASSEMBLY MOUNTS OVERVIEW .
Nut
- Only remove if the transmission mount must be separated from the transmission support
- For the tightening specification, refer to ASSEMBLY MOUNTS OVERVIEW .
Bolt
- For the tightening specification, refer to ASSEMBLY MOUNTS OVERVIEW .
Gearbox Support
- Removing and installing, refer to TRANSMISSION SUPPORT AND TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Only remove if the transmission mount must be separated from the transmission support
- For the tightening specification, refer to ASSEMBLY MOUNTS OVERVIEW .
Nut
- For the tightening specification, refer to ASSEMBLY MOUNTS OVERVIEW .