Radiator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

If there are small impressions on the fins, refer to COOLER AND CONDENSER ASSEMBLY .

Vehicles through MY 2013:

-- Install the hydraulic fluid cooler, refer to HYDRAULIC FLUID COOLER, REMOVING AND INSTALLING .

All Vehicles:

-- Install the charge air cooler, refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .

-- Connect the coolant hoses with the connector coupling, refer to Figure.

NOTE:

Do not reuse used coolant.

-- Fill with coolant, refer to COOLANT, DRAINING AND FILLING .