Cover Profile, Replacing: Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- 1 -
Windshield
- Removed.
- 2 -
Cover Profile
- Before installing new cover profile, remove residue completely using a commercially available window scraper.
- Clean adhesion area with cleaning solution D 009 401 04.
- Apply on to interior of window using, for example, a soft pencil at a distance -a- = 8 mm from upper window edge.
- Prime adhesion surface with D 009 200 02 up to marking applied earlier and let it air dry for at least 10 minutes.
- Press cover profile onto window centered with rear edge to end of priming (pencil marking).
- Press on cover profile firmly using an application roller.
- Reinstall window.