LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Volkswagen >> 2017 >> e-Golf SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 528 (3.0L - Exhaust System & Emission Controls - Engine Code: CPNA) >> 26 Exhaust System, Emission Controls >> Selective Catalytic Reduction System >> Reducing Agent Metering System Control Module -J880-, Removing And Installing >> Removing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reducing Agent Metering System Control Module -J880-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the right luggage compartment side trim panel, refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITH SELECTIVE CATALYTIC REDUCTION SYSTEM .

-- Remove the right rear lid spring, refer to REAR LID HINGE, REMOVING AND INSTALLING .

-- Disconnect the connectors -1 and 2-.

Fig 1: Identifying Connectors
GWWA26-11236Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove the Reducing Agent Metering System Control Module -J880-.