Reducing Agent Metering System Control Module -J880-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- After replacing, the Reducing Agent Metering System Control Module -J880- must be parameterized. See Guided Functions Vehicle Diagnostic Tester.

-- Install the rear lid spring, refer to REAR LID HINGE, REMOVING AND INSTALLING .

-- Install the luggage compartment side trim panel, refer to OVERVIEW - LUGGAGE COMPARTMENT SIDE TRIM PANEL, VEHICLES WITH A SELECTIVE CATALYTIC REDUCTION SYSTEM .