Check vehicle key function
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
- Separate keys so that each can be checked individually for function.
- Mechanically lock and unlock drivers door with each key.
- Remove radio operation (press a remote control operation button)
- Insert each key in ignition and switch ignition on. Immobilizer key symbol in instrument cluster must go out after two seconds. If key symbol blinks, key is not programmed to immobilizer. Guided Fault Finding; Program vehicle key
- Remove radio operation (press a remote control operation button)
NOTE:
- Enter number of keys checked and delivered to customer in delivery protocol.