Navigation System with CD Drive Control Module J401 , removing and installing

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Special tools, testers and auxiliary items required

Fig 1: Identifying Special Tools - Radio Removal Tool T10057

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Radio removal tool T10057

Turn off all electrical components.
Remove ignition key.

Removing

Open left luggage compartment storage bin.

Fig 2: Identifying Navigation System With CD Drive Control Module J401 And Installation Frame

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insert two clips on Radio Removal Tool T10057 into release slits on Navigation System with CD Drive Control Module J401 - 2 - until they engage. Points on grip eyes face outward.
Remove Navigation System with CD Drive Control Module J401 - 2 - from installation frame - 1 -.
Disconnect connectors on Navigation System with CD Drive Control Module J401 - 2 -.
Remove Radio Release Tool T10057 by pressing locking tabs on Navigation System with CD Drive Control Module J401.

Installing

Connect all harness connectors.
Slide Navigation System with CD Drive Control Module J401 in until it engages in mounting frame.
If necessary, perform adaptations on Navigation System with CD Drive Control Module J401.