Line Routing And Securing
WARNING: This page is about a different car, the 2016 Volkswagen Touareg and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the lines.
The lines can be damaged by the moving or hot components.
-- Route the wires in the original cable guide.
-- Ensure sufficient clearance to moving or hot components.
-- Replace all cable ties, heat shield boots, clips and similar which had to be removed during the removal process. Install in the same position.
- Prevent the risk of interchanging and restore the original installation position. To do so mark the fuel, vacuum EVAP system lines or wire or take pictures before removing. If necessary, draw sketches or take pictures.