Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to Overview - Noise Insulation .

-- Disconnect the connector from the Engine Speed Sensor -G28-.

-- Remove the bolt -1- from the front final drive. Pry out the rubber cover -2-.

Fig 1: Identifying Bolt -1- And Rubber Cover -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.

Fig 2: Identifying Bolt -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.