Camshaft Position Sensor -G40-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Touareg and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Fig 1: Camshaft Position Sensor -G40- Location

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1-, and remove the Camshaft Position Sensor -G40- -2-.