Overview - Ignition System
WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The Engine Speed Sensor -G28- is on the cylinder block -item 26- PART II - List Item:Engine Speed Sensor -G28- .
- Ignition Coils with Power Output Stage - N70, N127, N291, N292, N323, N324-
- Remove and install with : T10095A
- Connector
- Black
- Use the : T10118 to remove
- Bracket
- For the Knock Sensor 1 - G61- connector
- Bolt
- 20 Nm
- Connector
- Black, 3-pin
- Gold plated sensor contacts and connector contacts
- Knock Sensor 1 -G61-
- Installed location: cylinder block exhaust side
- Bolt
- 20 Nm
- Tightening specifications affect function of knock sensor
- Exhaust Camshaft Adjuster
- Identification: 32A
- With sensor wheel for the Camshaft Position Sensor 2 -G163-
- Camshaft adjuster with camshaft timing chain, installing. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .
- Cover
- Connector
- Black, 3-pin
- Gold plated sensor contacts and connector contacts
- Bolt
- 10 Nm
- Camshaft Position Sensor 2 -G163-
- For the exhaust camshaft
- Gold plated sensor contacts and connector contacts
- O-Ring
- Always replace
- Camshaft Position Sensor -G40-
- For the intake camshaft
- Gold plated sensor contacts and connector contacts
- Knock Sensor 2 -G66-
- Installed location: cylinder block intake side
- Gold plated sensor contacts and connector contacts
- Connector
- Black, 2-pin
- Gold plated sensor contacts and connector contacts
- Intake Camshaft Adjuster
- Identification: 24E
- With sensor wheel for the Camshaft Position Sensor - G40-
- Camshaft adjuster with camshaft timing chain, installing. Refer to CAMSHAFT ADJUSTER, REMOVING AND INSTALLING .
- Spark Plug
- 18 Nm
- Remove and install with the :3122B
- Type and electrode gap. Refer to TEST DATA AND SPARK PLUGS .
- Control Housing
- For the camshaft adjustment
- Removing and installing. Refer to CAMSHAFT, REMOVING AND INSTALLING .