Overview - Selector Mechanism, Vehicles From 06/2012
WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
- Handle with Shift Cover
- Selector lever handle, removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
- Ear Clamp
- For fastening the handle on the selector lever
- Will be damaged during removal, always replace.
- Selector Mechanism with Gearshift Housing and Selector Lever Cable
- With installed Selector Lever Park Position Lock Switch -F319-, with Selector Lever Sensor System Control Module -J587- with Tiptronic Switch -F189- and Shift Lock Solenoid -N110-
- The selector mechanism and the selector lever cable cannot be separated from each other. Both are removed at the same time.
- Do not bend or kink the cable.
- Removing and installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Checking and adjusting the cable. Refer to SELECTOR LEVER CABLE, CHECKING AND ADJUSTING
- Bolt
- 10 Nm
- Quantity: 4
- Centering Bracket
- Not reinstalled after assembly
- Lock Washer
- Always replace after removing
- Bolt
- 12 Nm
- Bolt
- Quantity: 2
- Not reinstalled after assembly