Control Module, Removing From Hydraulic Unit

WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Set the hydraulic unit with the control module upward on a clean, level surface.

-- Remove the inner TORX^® bolt from the control module.

-- Pull control module off from hydraulic unit -arrow- without angling.

Fig 1: Identifying Removal Of Control Module From Hydraulic Unit

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

WARNING:

The circuit board is laid open on a disconnected control module.
No moisture or dirt particles must get into the control module.
Avoid build-up of static electricity!

-- Cover control module magnetic coils with a lint free cloth.

After separating the control module and hydraulic unit, use transport protection for valve body.