Front Axle Speed Sensor, Removing And Installing: Installing
WARNING: This page is about a different car, the 2017 Volkswagen Touareg, 2016 Volkswagen Touareg, and 2015 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Before inserting the speed sensor, clean the inner surface of the hole and coat the speed sensor all-round with Polycarbamide Grease: G 052 142 A2 .
-- Insert the speed sensor into the hole in the wheel bearing housing and tighten the bolt to 8 Nm.
-- Connect the speed sensor to speed sensor wiring.