Brake Lines, Repairing
WARNING: This page is about a different car, the 2016 Volkswagen e-Golf and 2015 Volkswagen e-Golf. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Brake Line Tool Kit :VAS6056
- Brake Charger/Bleeder Unit :VAS5234
Flare brake lines with 5 mm outer diameter using :VAS6056 without damaging coating. In this way, brake lines can be inexpensively partially replaced in certain cases.
Working with brake line kit :VAG1356 is not permitted because of the coating and diameter of black brake lines.
NOTE:
Brake lines must not be bent more than 90°, otherwise they kink or deform causes unacceptable constriction in the line.
Disconnect brake lines preferably at underbody.
Position of intermediate pieces should be selected so that they cannot rub against moving parts.
Do not lubricate spindle, clean only with mineral spirits.
Listing of Individual Tools:
- :VAS6056/1
- The :VAS6056/1 contains the :VAS6056/6 .
- :VAS6056/2
- :VAS6056/3
- The threaded pins (in shaft and at sides) are set and must not be adjusted!
- :VAS6056/4
- :VAS6056/5
- 6 mm Offset Screwdriver
- :VAS6056/7