Special Tools

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Front Door Template:T40038/10 for the front door.
Rear Door Template:T40038/11 for the rear door.
Use the Door Adjustment Template:T40038/10 on the front door with the side -A- for the front measuring point on the B-pillar or -B- for the rear measuring point on the B-pillar.

Fig 1: Identifying Door Adjustment Template T40038 /10
Courtesy of AUDI OF AMERICA, LLC
Window Slot Seal Tool:T40219

Fig 2: Identifying Window Slot Seal Tool T40219
Courtesy of AUDI OF AMERICA, LLC
Adhesive Strip Remover:VAS6349

Fig 3: Adhesive Remover VAS 6349
Courtesy of AUDI OF AMERICA, LLC
Roller:3356

Fig 4: Application Roller 3356
Courtesy of AUDI OF AMERICA, LLC
Gauge - Gap Adjustment:3371

Fig 5: 3371 Special Tool
Courtesy of AUDI OF AMERICA, LLC
Pry Lever:80-200

Fig 6: 80-200 Pry Lever
Courtesy of AUDI OF AMERICA, LLC
The front door and the rear door have different templates.
The min and max markings are used to check the lateral adjustment.
The groove in the center of the template is used for checking the height.
The 0.6 mm graduation on the ends of the template is used for checking the recess of the front door to the fender, or of the rear door to the front door.