ATF Lines, Removing And Installing: Clean
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to CLEAN WORKING CONDITIONS .
-- Before installing a replacement transmission, always clean out the ATF cooler and ATF lines using compressed air (maximum 10 bar (145 psi).
-- Place the Used Oil Collection and Extraction Unit:SMN372500 under the transmission.
NOTE:
If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.