Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
If replacing the control module, select "replace" in "Guided Functions" on the appropriate control module.
Use the Vehicle Diagnostic Tester.
Follow the prompts on the screen.
-- Remove the steering column. Refer to STEERING COLUMN, REMOVING AND INSTALLING .
-- Disconnect the connector -1-.
-- Remove the bolt -2-.
-- Slightly lift the Power Adjustable Steering Column Control Module -J866- -3- and remove it from the steering column in the direction of the -arrow-.