Front Trim Bracket/Compressor/Control Module, Reclining/MULTICONTOUR Seat, Removing And Installing: Installing
WARNING: This page is about a different car, the 2018 Audi A8 Quattro, 2017 Audi A8 Quattro, 2016 Audi A8 Quattro, and 2015 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert front bracket -arrows- by making sure that the tabs -2- grip into the bracket -1, 3, 4-.
Installation is performed in reverse order of removal, noting the following:
WARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
- Observe all measures when installing the front seat, refer to FRONT SEAT, STANDARD/MULTICONTOUR SEAT, REMOVING AND INSTALLING .