Side Window, Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2018 Audi S8, 2018 Audi A8 Quattro, 2017 Audi S8, 2017 Audi A8 Quattro, and 2016 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- The roof trim molding and side trim molding must be installed before installing the side window.

-- Installing. Refer to BONDED WINDOW GLASS INSTALLATION INSTRUCTIONS .

-- Prepare the undamaged window for installing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the new window for installation. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

NOTE:

1K Window Adhesive:DH 009 100 03 (small cartridge) is recommended when bonding a single window 2K Window Adhesive Kit:D 004 600 A2 is recommended when bonding more than one window.

-- If the window is new, first insert the securing pin in the C-pillar, D-pillar and then press the window into the cut-out.

If a side window is going to be re-installed, then secure it to the C-pillar and D-pillar with adhesive tape.

-- Observe minimum curing time. Refer to MINIMUM CURING TIME FOR BONDED WINDOWS .