Glow Plugs, Removing And Installing: Installing

WARNING: This page is about a different car, the 2012 Volkswagen Touareg and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Carefully install the glow plugs by hand or with a hose without bending it.

-- Use a Glow Plug Socket:3220 or a Glow Plug Socket:VAS6454 with a suitable torque wrench to tighten the glow plugs.

Glow Plug Tightening Specification: 17 Nm

-- Connect the glow plug connector to the corresponding glow plug and make sure it is secure in the connector.

Install In Reverse Order Of Removal.

Intake manifold flap motor tightening torque - assembly overview. Refer to OVERVIEW - INTAKE MANIFOLD