Ribbed Belt, Checking Condition

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Perform The Following Procedure:

-- Remove the engine cover, if necessary.

-- Check for example the ribbed belt -1- for:

Fig 1: Identifying Ribbed Belt(s) -1-

Courtesy of AUDI OF AMERICA, LLC

Sub-surface cracks (cracks, core ruptures, cross sectional breaks)
Separation (cover layer, belt cords)
Breaks at lower layer
Fraying of cords
Wear at flanks (material wear, frayed flanks, hardening or glazing of flanks, surface cracks)
Oil or grease contamination

-- Install the engine cover.

NOTE:

The ribbed belt must be replaced if any damage is found. This will prevent any belt malfunctions. Replacing the belt is a repair procedure.