Rear Display And Control Head, Removing And Installing: Installing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If a new Rear A/C Display Control Head -E265- is installed, the replace control module function and a basic setting must be performed in the Guided Fault Finding or the Guided Functions.
When installing the Rear A/C Display Control Head -E265-, it must be ensured that pressure is not exerted on the surfaces of the temperature regulator and the display when inserting. Excessive pressure can result in damage to the Rear A/C Display Control Head -E265-.
-- Connect the connector of the Rear A/C Display Control Head -E265-.
-- Clip the Rear A/C Display Control Head -E265- into the center console by pressing on the edge.