Mount With Free-Running Hub On A/C Compressor, Removing And Installing: Installing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following:

-- First screw the free-running hub onto the A/C compressor input shaft by hand until it stops.

Fig 1: Identifying A/C Compressor Free-Running Hub, Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the :3400 -1- into the A/C compressor free-running hub.

-- Insert the M10 socket -arrow- into the A/C compressor shaft.

-- Tighten the free-running hub using the :VAG1331/6 -2- and the :VAG1332 .

Tightening Specification Is 80 Nm.