Engine Speed Sensor -G28-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Disconnect the connector from the Engine Speed Sensor -G28-.

-- Remove the bolt -1- from the front final drive. Pry out the rubber cover -2-.

Fig 1: Identifying Bolt -1- And Rubber Cover -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.

Fig 2: Identifying Bolt -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.