Engine, Installing: Notes

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Positioning Tool: VAS6131/17

Individual components of the positioning tool:

Dot Laser: VAS6131/17-1
Adapter M14 x 1.5: VAS6131/17-2
Adapter M12 x 1.5: VAS6131/17-3
Adapter M10: VAS6131/17-4

CAUTION:

Note The Following whenever working inside the engine compartment due to limited space:

Route all lines and cables in their original locations.
Ensure sufficient clearance to all moving or hot components.

NOTE:

When moving the engine/transmission assembly into the body, it is always necessary to bring engine carrier into contact on body using the :VAS6131 . >>Pulling up<< the engine carrier with mounting bolts damages thread inserts!

Work Procedure

Install in reverse order of removal. Note The Following:

-- For assembling the engine and transmission, follow the "Transmission, Installing" procedure. Refer to Installing .