Aligning Scissor Lift Table
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Install suitable adapters -A- at the left and right sides in a threaded hole on the subframe mount on the longitudinal member.
-- Install the : VAS6131/17-1 -B- in the adapter -A-.
-- Insert the bolts -C- center in the securing point on the subframe with the bolt heads facing upward.
-- Switch on the : VAS6131/17-1 and align the scissor lift table so that the laser beam strikes the bolt head on the left and right. Remove the dot laser and adapter again after aligning.