Vehicle Electrical System Control Module -J519-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Remove the driver side instrument panel cover. Refer to STORAGE COMPARTMENTS, COVERS AND TRIM .
NOTE:
The number of multi-pin connectors on the Vehicle Electrical System Control Module -J519- will vary depending on the vehicle equipment level.
-- Release and disconnect the connectors depending on vehicle equipment.
-- Push the locking mechanism -arrow- downward and remove the Vehicle Electrical System Control Module -J519- -1- downward. Pay attention to the wires still connected.